No announcement yet.

Photos from C.A. Restoration & Fabrication's post

  • Filter
  • Time
  • Show
Clear All
new posts

  • Photos from C.A. Restoration & Fabrication's post

    It's been a busy few days on Graham Traxson #imp new inner and centre sill made up on the floor then fitted along with the door which is not the original but in fantastic condition. The outer sill and all its closing panels were all trial fitted so as to make sure all sits about right before welding on the main sill . The sill is fitted all be it with a bit of a larger door gap than I would like but when the A and B post dont move and the sill is up against them and the door is on its lines there is not a lot you can do unless you want to re invent the wheel . Progress is going well hopefully will get the sills closing panels finished tomorrow and get on the rear corner . Stay safe all and thanks for the support in viewing my page much appreciated

    (Feed generated with FetchRSS)