then fixing what was not...
50 results in 0.0033 seconds.
-
Mildred out for a bit of fresh air.
After drilling two extra holes in Pats walls to move a light switch
then fixing what was not...
-
OK, new small logo now just says IMP - better worse not fussed ?
4Better50.00%2Worse0%0Dont waste your time John the forums still work the same, get back to working on the car !50.00%2OK, new small logo in your browser windows now just says IMP
Is that better ? What do... -
What make s a good forum - the ultimate question and the answer could indeed be 42 !
OK, I borrowed a science fiction reference but it could have been worse, it could have been a trekkie...
-
Classic Number Plate refurbishment - how original
Decided for DDG as the front number plate was in good condition to refurbish it, the aluminium... -
Correct offsets for wheels on an Imp
A topic that seems simple but often confuses me, perhaps as its always a take it for granted.
... -
Difference in early Mk 1 and M2 Dash Panels Hillman Imp
A common question as regards Imp Dash and often cause for confusion
So just adding a note... -
Quick trigger wheel design for standard Imp crankshaft pulley - make your own ?
Quick trigger wheel design for standard Imp crankshaft pulley - make your own ?
...Last edited by John A. Ross; 5 June 2020, 01:58 PM. -
Exploded diagram of rear brakes
Just rebuilding my rear brakes, does anyone have an exploded diagram showing the spring retaining clips... -
LED Modification to period looking Lucas Reverse Lamp
I went completely off at a tangent earlier and decided to restore the lamp that Andrew dropped off to...
Last edited by John A. Ross; 7 May 2020, 09:15 PM. -
Jim McGurks BMW Powered Imp KNT 173F - now being restored
-
Emoticons bar - Should i turn feature on ??
5Enable Emoticons - YES PLEASE0%0Enable Emoticons - OK FOR ME0%0Enable Emoticons - DO NOT CAR ONE WAY OR OTHER20.00%1LEAVE EMOTICONS OFF AS ITS TOO MUCH FLUFF80.00%4The poll is expired.
OK, we do not get a load of traffic but there was a feature introduced a while back which I have not... -
Rear Hatch Vent Stay version 2
After taking inspiration from Dave Lane post on his spin from the Cosmic window hatch opener I made...
Last edited by John A. Ross; 1 June 2020, 10:30 PM. -
Dipping interior mirror
With the increasing use on moderns of HID headlights and retina removing DRLs a dipping interior mirror...
-
Renew heater hoses - not as bad as it sounds
After a Facebook reply I decided to add it here as well so I don't have to repeat it again.
...Last edited by John A. Ross; 24 April 2020, 10:23 PM. -
Clutch roller release bearing
Bast cleaned clutch fork, strengthened and modified to accept a roller release bearing with a proper...