General Imp Based Discussions - Hillman Imp Forums

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go faster wipers

Ive developed a new armature winding for both the DR3A and 14W wiper motors , they are around 20 - 25%...

Organise a trackday for classic and historic saloons

I have come up with an idea to try and Organise a trackday for classic and historic saloons .
...

68 stiletto

Managed to get some paint on got the bug again ...

BRU 434B And the Journey Begins - First Engine Removal and more

Hi all,

Firstly hope you are all well and staying safe!?

As...

Check Straps for Lowered Suspension - Daves Singer Chamois

Il start with a real simple mod . For all you people running monte front springs its advisable to fit...

Topics	Statistics	Last Post
V8 Conversion for Hillman Imp courtesy of Rob Machin by John A. Ross Started by John A. Ross, 15 February 2020, 02:52 PM	15 responses 777 views 3 reactions	Last Post by Colimp66 11 May 2021, 04:30 PM
I know it's only the underside. But a lot of work and finally finished underneath by WebBot Started by WebBot, 3 May 2021, 11:16 AM	1 response 54 views 0 reactions	Last Post by Uncle Henry 3 May 2021, 01:17 PM
Thats it, she's finally finished. I know it won't be to everyone's taste. by WebBot Started by WebBot, 3 May 2021, 11:16 AM	1 response 51 views 4 reactions	Last Post by Uncle Henry 3 May 2021, 01:16 PM
Two cars out at least with Stirling Classic car club. by John A. Ross Started by John A. Ross, 25 April 2021, 04:40 PM	3 responses 129 views 2 reactions	Last Post by John A. Ross 25 April 2021, 09:07 PM
Run out for the day :-) by John A. Ross Started by John A. Ross, 25 April 2021, 04:38 PM	0 responses 352 views 1 reaction	Last Post by John A. Ross 25 April 2021, 04:38 PM
Voltmeter wiring by Petowner Started by Petowner, 3 April 2021, 09:12 AM	30 responses 358 views 1 reaction	Last Post by John A. Ross 21 April 2021, 05:34 PM
What can you cram in an Imp ? by John A. Ross Started by John A. Ross, 15 April 2021, 10:55 AM	4 responses 172 views 3 reactions	Last Post by PMCG 18 April 2021, 05:50 PM
Ex- pressed steel panels by Gary Whitaker Started by Gary Whitaker, 16 April 2021, 11:12 AM	8 responses 127 views 4 reactions	Last Post by Gary Whitaker 17 April 2021, 02:50 PM
Bluetooth radios and brackets by Macrootes Started by Macrootes, 13 April 2021, 11:02 AM	5 responses 165 views 3 reactions	Last Post by John A. Ross 14 April 2021, 10:51 AM
Big valve head now skimmed and newly ported and valve guides by Paul Conroy Started by Paul Conroy, 13 February 2021, 03:48 PM	7 responses 256 views 4 reactions	Last Post by PMCG 26 February 2021, 09:16 PM

Previous 1 5 7 8 9 10 11 12 13 15 20 21 template Next

No topics found.