R. Heater And Controls - Hillman Imp Forums

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Ive developed a new armature winding for both the DR3A and 14W wiper motors , they are around 20 - 25%...

I have come up with an idea to try and Organise a trackday for classic and historic saloons .
...

Managed to get some paint on got the bug again ...

Hi all,

Firstly hope you are all well and staying safe!?

As...

Il start with a real simple mod . For all you people running monte front springs its advisable to fit...

Topics	Statistics	Last Post
Closed, Sticky: WSM141 Section R - HEATER by John A. Ross Started by John A. Ross, 5 January 2020, 07:41 PM	0 responses 115 views 0 reactions	Last Post by John A. Ross 5 January 2020, 07:41 PM
Heater Blower Motor Solution - IMProved Alternative to Factory One by John A. Ross Started by John A. Ross, 20 January 2020, 09:00 PM	2 responses 849 views 2 reactions	Last Post by John A. Ross 19 May 2020, 06:40 PM
Heater Blower Motor Solution - IMProved Alternative to Factory One by MartinSullivan Started by MartinSullivan, 27 January 2020, 04:49 PM	1 response 107 views 0 reactions	Last Post by John A. Ross 27 January 2020, 06:35 PM
Heater Blower Motor Solution - IMProved Alternative to Factory One by John A. Ross Started by John A. Ross, 20 January 2020, 11:24 PM	0 responses 90 views 0 reactions	Last Post by John A. Ross 20 January 2020, 11:24 PM
Restoration and Anatomy Of A Standard Imp Heater Blower by John A. Ross Started by John A. Ross, 20 January 2020, 08:07 PM	1 response 516 views 1 reaction	Last Post by John A. Ross 20 January 2020, 08:12 PM

Previous template Next

No topics found.