N2. Electrical System - Lighting, Controls, Binnacles

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go faster wipers

Ive developed a new armature winding for both the DR3A and 14W wiper motors , they are around 20 - 25%...

Organise a trackday for classic and historic saloons

I have come up with an idea to try and Organise a trackday for classic and historic saloons .
...

68 stiletto

Managed to get some paint on got the bug again ...

BRU 434B And the Journey Begins - First Engine Removal and more

Hi all,

Firstly hope you are all well and staying safe!?

As...

Check Straps for Lowered Suspension - Daves Singer Chamois

Il start with a real simple mod . For all you people running monte front springs its advisable to fit...

Topics	Statistics	Last Post
Closed, Sticky: WSM141 Section N2 - ELECTRICAL Part 9 of 15 by John A. Ross Started by John A. Ross, 9 January 2020, 01:03 AM	3 responses 163 views 0 likes	Last Post by John A. Ross 5 April 2022, 09:46 PM
Considering a new wiring harness for your Imp, nothing to fear ! by John A. Ross Started by John A. Ross, 27 February 2022, 11:32 AM	0 responses 60 views 2 likes	Last Post by John A. Ross 27 February 2022, 11:32 AM
Dimensions for aperture used on MK 3 ( round clock ) Dash Panels by John A. Ross Started by John A. Ross, 28 December 2021, 01:26 PM	0 responses 15 views 0 likes	Last Post by John A. Ross 28 December 2021, 01:26 PM
Lights On Reminder Fitted By Dave Lane by Dave Lane Started by Dave Lane, 13 August 2021, 05:28 PM	1 response 71 views 3 likes	Last Post by Hido-San 15 August 2021, 10:39 PM
Some observations on using linear regulators over older voltage stabilisers by John A. Ross Started by John A. Ross, 30 June 2021, 05:13 PM	11 responses 141 views 0 likes	Last Post by John A. Ross 10 July 2021, 11:32 AM
Easy to fit hazard light options for the Imp by John A. Ross Started by John A. Ross, 13 June 2021, 11:28 AM	2 responses 237 views 2 likes	Last Post by John A. Ross 14 June 2021, 09:59 AM
Mk 1 Speedo - restoration by High_dan Started by High_dan, 13 May 2021, 09:49 AM	10 responses 72 views 1 like	Last Post by High_dan 27 May 2021, 04:14 PM
Refurbishment of a pawl unit - these get very little notice or attention by John A. Ross Started by John A. Ross, 24 June 2020, 07:48 PM	5 responses 271 views 2 likes	Last Post by GaryHnz 25 June 2020, 10:41 AM
Refurbishment and Calibration on Smiths Voltage Gauge - Battery Condition by John A. Ross Started by John A. Ross, 4 June 2020, 09:32 PM	0 responses 134 views 0 likes	Last Post by John A. Ross 4 June 2020, 09:32 PM
Binnacle refurbishment as done on DDG 220C by John A. Ross Started by John A. Ross, 3 June 2020, 09:58 PM	0 responses 63 views 0 likes	Last Post by John A. Ross 3 June 2020, 09:58 PM
Franks replacement binnacle decals placement - Courtesy of Rootes Archive Centre by John A. Ross Started by John A. Ross, 3 June 2020, 09:34 PM	0 responses 53 views 0 likes	Last Post by John A. Ross 3 June 2020, 09:34 PM