S: Special Tools - Hillman Imp Forums

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go faster wipers

Ive developed a new armature winding for both the DR3A and 14W wiper motors , they are around 20 - 25%...

Organise a trackday for classic and historic saloons

I have come up with an idea to try and Organise a trackday for classic and historic saloons .
...

68 stiletto

Managed to get some paint on got the bug again ...

BRU 434B And the Journey Begins - First Engine Removal and more

Hi all,

Firstly hope you are all well and staying safe!?

As...

Check Straps for Lowered Suspension - Daves Singer Chamois

Il start with a real simple mod . For all you people running monte front springs its advisable to fit...

Topics	Statistics	Last Post
Closed, Sticky: WSM141 Section S - SPECIAL TOOLS by John A. Ross Started by John A. Ross, 5 January 2020, 07:35 PM	0 responses 213 views 0 reactions	Last Post by John A. Ross 5 January 2020, 07:35 PM
Handmade special tools we make - rear drive shaft pusher / crank pulley puller by John A. Ross Started by John A. Ross, 15 April 2020, 11:41 PM	3 responses 698 views 1 reaction	Last Post by John A. Ross 13 June 2022, 08:32 PM
New tool made for Lucas Switches by Petowner Started by Petowner, 17 November 2021, 04:23 PM	5 responses 284 views 3 reactions	Last Post by Petowner 26 November 2021, 02:00 PM
RG 368 input shaft needle roller bearing inner sleeve removel tool by Gary Whitaker Started by Gary Whitaker, 26 November 2020, 08:52 PM	1 response 145 views 4 reactions	Last Post by Gary Whitaker 26 November 2020, 09:06 PM
RG 365 pinion head tool by Gary Whitaker Started by Gary Whitaker, 26 November 2020, 08:36 PM	1 response 87 views 5 reactions	Last Post by Gary Whitaker 26 November 2020, 08:37 PM
Handmade special tools we make - clutch slave cylinder piston retainer by John A. Ross Started by John A. Ross, 15 April 2020, 11:44 PM	2 responses 220 views 1 reaction	Last Post by John A. Ross 16 April 2020, 12:04 AM
RG.385 Swivel pin bush remover / replacer - King Pins This Is A Must Have ! by Hido-San Started by Hido-San, 15 February 2020, 05:51 PM	1 response 408 views 2 reactions	Last Post by Hido-San 15 February 2020, 09:20 PM
RG.374 - Clutch Plate Centraliser - Clutch Alignment Tool by Hido-San Started by Hido-San, 15 February 2020, 06:32 PM	1 response 300 views 1 reaction	Last Post by John A. Ross 15 February 2020, 06:36 PM
RH.379 - Rear hub bearing assembly tool by Hido-San Started by Hido-San, 15 February 2020, 05:57 PM	0 responses 362 views 3 reactions	Last Post by Hido-San 15 February 2020, 05:57 PM
RG.536 Crankshaft Spigot Bush Remover / Replacer Oilite or Roller by Hido-San Started by Hido-San, 15 February 2020, 05:42 PM	0 responses 131 views 2 reactions	Last Post by Hido-San 15 February 2020, 05:42 PM
RG.355 Cylinder Head bolt Wrench - Access Cylinder Head Bolts Remove Not Cam Carrier by Hido-San Started by Hido-San, 15 February 2020, 05:37 PM	0 responses 900 views 1 reaction	Last Post by Hido-San 15 February 2020, 05:37 PM

Previous template Next

No topics found.