...
20 results in 0.0027 seconds.
-
UJ conversion for gear linkage
Mikes UJ mounts and the old crusty one you likely have in your car now
... -
Front number plate bracket
Always thought the factory bracket was a bit pants TBH , Just a bit of angled steel with the mount holes...
-
B post door catch repair
It always baffled me why the door catch is made of soft alloy AKA Monkey metal.
In the days before... -
Battery clamp
Ever noticed that modern 037 / 038 batteries dont fit with the hooked satays too well ??
... -
Water Heated washers
Heater part is dead simple , just a length of 15mm copper pipe with some copper brake pipe wound around...
-
Adding dual resevoirs to DDG220C
Not a lot has been happening ut as High_dan sent me some pictures of the resevioirs going in I thought...
Last edited by John A. Ross; 15th March 2020, 11:55 PM. -
Fuses - lots of fuses
John Ross is doing a proper adding fuses thread on here but i thought id stick what ive done just so...
-
Engine bay wiring
Whilst rewiring the Singer to add a bucket load of fuses ( 19 to be precise ) I moved a fair bit of...
-
Extra interior / boot / engine bay lights
Imps only ever got one interior light and on some models that wasnt even door operated .
Also... -
Two engine lid stays
As you probably know all Imps only had one from the factory.
Early ones were wire and later ones... -
Wiper motor mod
So the Singers wiper motor was making strange noises and this was tracked down to a worn armature shaft...
Last edited by John A. Ross; 1st March 2020, 10:06 PM. -
Rear gearlever bush protection plate
Try as i might i could never work out the best way to fit these so to solve the issue i made double...
-
Boot interior card
On mine as well as many other cars the centre card boot trim that sits on the tank and also goes up...
-
Throttle cable mod
Standard Imp throttle cables can be a bit course and getting hard to find .
So I fitted Shimano... -
High level brake light
With Imps being small and low ( sometimes very low
) having an extra high level brake light seemed...