25 results in 0.0029 seconds.
-
Adjustable throttle response .
This only applies to retro fitted carb set ups . The factory Solex and Stromberg response is spot on...
-
oil filter / cooler pipe guard / hiding devise
Made a small guard for the back end to hide / protect the filter housing and cooler pipes , I think...
-
Badges
Dont know about you lot but I always thought that the badges on Imps were mostly too big for the car...
-
External boot lock
Some Imps came with an external boot lock however many did not including my Chammy .
This took... -
Common earth points
Lucas through no fault of their own often had to put earth and live wires together taped up in one loom...
-
Replacement Car Informatioon Plates and VIN Plates
Restoring your car and the plates let your new paintwork down. Roger Gill supplies newly remade parts...
Last edited by John A. Ross; 4 May 2020, 10:49 AM. -
-
Rear Hatch Vent Stay version 2
After taking inspiration from Dave Lane post on his spin from the Cosmic window hatch opener I made...
Last edited by John A. Ross; 1 June 2020, 09:30 PM. -
Dipping interior mirror
With the increasing use on moderns of HID headlights and retina removing DRLs a dipping interior mirror...
-
Gear selector shaft
Knackered , worn or rusty gear-linkage rod , no probs if you can braze - its only 1 inch diameter rod...
-
Front number plate bracket
Always thought the factory bracket was a bit pants TBH , Just a bit of angled steel with the mount holes...
-
Adding dual resevoirs to DDG220C
Not a lot has been happening ut as High_dan sent me some pictures of the resevioirs going in I thought...
Last edited by John A. Ross; 15 March 2020, 11:55 PM. -
Engine bay wiring
Whilst rewiring the Singer to add a bucket load of fuses ( 19 to be precise ) I moved a fair bit of...
-
Two engine lid stays
As you probably know all Imps only had one from the factory.
Early ones were wire and later ones... -
Wiper motor mod
So the Singers wiper motor was making strange noises and this was tracked down to a worn armature shaft...
Last edited by John A. Ross; 1 March 2020, 10:06 PM.
