Announcement

Collapse
No announcement yet.

Transaxale tools and rebuild

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • This pic shows the gear teeth in good uniform condition Click image for larger version

Name:	IMG_20210428_135228864_HDR~2.jpg
Size:	414.0 KB
ID:	15531

    Comment


    • And that's about it store it with oil in and give it a turn every time you pop in the garage just to put the oil over all the gears
      Have a good build

      Comment


      • Thanks for sharing Gary, the year just seems to have flown by. You managed a lot this year before weather turned.
        / John

        Comment


        • Excellent article Gary. One piece of advice if taking a box out of storage and it is full of oil (or fill it first) roll the box over to drown the entire innards of the box with oil. The start the car on axle stands with rear wheels of the ground and select a gear as soon as possible so the pinion shaft spins and splash lubricates the upper tail bearing as this gets zero lubrication unless pinion shaft is spinning. Same applies after winter lay up of your classic do not start it up after a long time and leave it idling to warm up until you have done tyre pressures , greased king pins etc. Either start and take for short drive or spin wheels on axle stands.

          Comment

          Working...
          X